The Dragino NBSN95/NBSN95A family is a deployment-ready range of water resistant NB-IoT (Narrow Band Internet of Things) devices that are available pre-packaged with various sensors such as soil moisture, distance detection, liquid level, and temperature/humidity sensors.
NB-IoT is a Low-Power Wide-Area Network (LPWAN) technology that allows devices to be accessed in remote locations and operate on battery for long periods of time, up to many years.
In this article we will look a the N95S31B, the model with the pre-packaged temperature/humidity sensors, the strengths and weaknesses of the device, and then walk through configuing the device and see it connect to an MQTT test server. Our previous article showed you how to set up an MQTT test server on Azure if needed.
The NBSN95 is an open source project, with both the software and hardware specifications available, if you need to customise the application. We have also previously reviewed the Dragion LDDS75 LoRaWAN device.
Continue reading Deployment ready NB-IoT device review — Unboxing the Dragino N95S31B(14 min read)
MQTT (originally Message Queuing Telemetry Transport) is an important protocol for IoT that has been widely adopted. Devices deployed to the field may be connecting to existing MQTT endpoints, however you may also want to deploy your own MQTT server for testing purposes.
This article shows you how to deploy an Eclipse Mosquitto MQTT server onto Azure, configured for secure connections (MQTTS, which is MQTT over TLS), accessible over the internet, and including support for both IPv6 and legacy IPv4.
First we will configure a network in Azure, then deploy the server, and then test the deployment.
The instructions below show the individual commands, but if you want a quick start then full scripts, with automatic parameters, are available on Github https://github.com/sgryphon/iot-demo-build/blob/main/azure-mosquitto/README-mosquitto.md
To deploy the network and then server components via the scripts:
az account set --subscription <subscription id>
$VerbosePreference = 'Continue'
Read on for the full details.
Continue reading Deploying a secure MQTT test server on Azure with IPv6(15 min read)